区域和语言选择
  • Global
  • 中国
  • Espana
  • Italia
  • Deutschland
  • France
  • Japan
  • America
  • Apmea
  • Europe
  • Australia
Page d'accueil > News > Informations détaillées
Suntech New Products Landed on SNEC
2019-06-05


In the morning on June 4, 2019, SNEC 13th  (2019) International Photovoltaic Power Generation and Smart Energy  Conference & Exhibition was launched in Shanghai New International  Expo Center.Suntech displayed 8 types of module with advanced  technology.



微信图片_20190604143323.jpg



Suntech  has participated in SNEC for many years in succession. Devoted to  driving the early realization of "grid parity" in PV power generation  and with a view to the white-hot competition trend in the industry,  Suntech has continuously pursued the reduction of module cost,  strengthened the R&D of new technologies and improvement of  production processes, and committed our efforts to the development and  upgrading of new high-efficiency modules by depending on our excellent  technical advantages and advanced manufacturing levels. The 8 modules  exhibited by Suntech this time involve different power dimensions,  different application scenarios, and even include multiple high power  modules above 400w.



HyproSTP440S-A26/Vfhb   

(Mono PERC Half Cell Black Solar Module)

8.HyproSTP440S-A26Vfhb高效单晶半片全黑组件.jpg


This  is the 440w High-efficiency Mono PERC Half Cell Black Solar Module in  the flagship Hipower series just launched on June 1, 2019. After  repeated tests, comparison, and study by the technical team of Suntech,  158.75mm2 mono PERC cell is adopted in this module; compared  with regular mono cell, it increases by 2mm in both length and width,  with the cell in a complete square, effectively removes the sealing  space of traditional mono modules, and increases the effective power  generation area by 1.2% and the power of the module by an average of 8w;  with a module conversion efficiency up to 20.4%, compared with products  of the same specifications, it can provide higher power output, lower  working temperature and higher peak power coefficient, which contributes  to additional power generation gain for customers. Moreover, its black  appearance matches more perfectly to the design aesthetics of modern  products. Both the 78-cell large cell design and higher power density  effectively reduce the installation area, save costs in labor and  supporting structures, and maximize the photovoltaic system's economic  superiority and output power. An example is the 120MW project in  southern Australia: with the common mono PERC half-cell 375W module  adopted, LCOE is about 0.03 USD/kW·h; in contrast, with the HIPower Max  440W module is adopted, LCOE can be reduced by up to 6%. In conclusion  of the technical advantages mentioned above, with outstanding cell  technologies and leading encapsulation process, this module enjoys a  maximum power up to 440w. The debut of this product on SNEC symbolizes  that the formal launching of ultra-high-power modules of Suntech on the  market, and it is another masterpiece of module 4.0 generation.



HyProSTP410S-72/Nmh+ 

(Bifacial Mono PERT Half Cell Solar Module)

1.HyProSTP410S-72Nmh+N型PERT高效单晶双面双玻半片组件.jpg


This  module adopts the N-type high-efficiency mono bifacial PERT cell, with  the maximum power gain on the back of the module reaching up to 30%; at  the same time, its adoption of the symmetric design of N-type bifacial  cells allows it to completely eradicate internal stress and greatly  reduce the occurrence of micro-cracks; moreover, N-type module is free  from LID features, which can effectively increase power generation.  Since it has a low internal resistance loss in the outdoor power  generation, and reduces the operating temperature of the module, the  power generation capacity is increased by about 1% compared with the  regular modules, thus effectively reducing the levelized cost of  electricity (LCOE).



SuperpolySTP390-78/Vnh

(Poly PERC 9BBHalf Cell Solar Module)

2.SuperpolySTP390-78Vnh9主栅多晶PERC半片组件.jpg


The  Poly PERC 9BB Half Cell Solar Module has a power 10w higher than that  of the regular 5BB module; since the density of grating lines increases  and the space is small, even there are micro-cracks and chipson the  cell, the power loss rate of multiple main grid cell can also decrease  relatively and still keep a good performance of power generation. At the  same time, its lower working temperature allows the module to produce  higher output power.



 HyProSTP330S-60/Pnhb

(Bifacial9BB Mono PERC Half Cell Black Solar Module)

3.HyProSTP330S-60Pnhb高效单晶9主栅半片全黑双面双玻组件.jpg


This  module adopts the bifacial PERC cell and combines the double-glass  module technology, with the maximum power gain at the back of the module  reaching up to 25%; its design of distributed junction box, allows the  zero sheltering of the module's back; moreover, its hall cell design  reduces the series resistance, decreases the shading area and greatly  increases the output power of the module.



HyProSTP330S-60/Pnh*

(Bifacial 9BB Mono PERC Half Cell Solar Module)

4.HyProSTP330S-60Pnh高效单晶9主栅半片双面双玻组件.jpg


The  product's glass is only 1.6mm+1.6mm in thickness and 16.9kg in weight;  the seamless assembly of its integrated border suite endows it with an  appearance of excellent design aesthetics and also allows it to  effectively save the installation room. This product does not only  achieve high attainments in appearance, but also shows good  sustainability with its credible quality in severe environments, such as  desert, farmland, and coast.



 HyPro STP340S-A60/Wfh

(SmartDC Solar Module)

5.HyPro STP340S-A60Wfh高效单晶智能组件.jpg


With  the built-in smart optimization, the High-efficiency Smart DC Solar  Module can reduce to the largest extent the mismatching of cell features  incurred by shade, pollution, aging and improper roof orientation, and  the resulting negative impacts, so as to ensure the maximum output  power. This product enables flexible solutions in any environment and  roof orientation.



 Hypro STP315S-20/Wfw-TG

(Self-Cleaning Smart DC Solar Module)

6.Hypro STP315S-20Wfw-TG高效单晶防污排水TG智能组件.jpg



The Self-cleaning Smart DC TG Solar Module adopts the design of anti-soiling coated glass  and  drainage frame, which enables the removing of stains and water stains  on the surface of the module and ensures power output. Its good  performance in impedance matching eliminates the influences incurred by  module-level mismatching. The real time warning and web-page monitoring  at the side of the module enhances the capacity of the system in normal  operation and accurate positioning of trouble spots, to increase the  maintenance efficiency of the system.



HyproSTP430S-84/Sfw

(Shingling Solar Module)

7.Hypro STP430S-84Sfw高效单晶叠瓦组件.jpg


The  High-efficiency Mono Shingling Module has a power 15% larger than that  of regular module, and can reduce the system's BOS cost and installation  cost by 10%; its exquisite appearance design can effectively reduce the  power loss caused by shadow.





Précédent:

Suivant: